-40%
1962-1972 GM convertible top pump motor 3 mounting feet grommets and a fill plug
$ 4.22
- Description
- Size Guide
Description
This listing is for3 of the convertible top pump mounting feet
and
1 reservoir fill plug
, they will work on most american cars that have
3 pointed rubber mounting feet
. The rubber grommets are made just like the original and will fit perfectly. If the pump in your car has 4 mounting feet we also have a listing that has 4 of the grommets as well.
Installation instructions
The mounting feet can be a bit of a pain to install, here is the best way we have found to install them. First spray the pointed end with some silicone spray, dish soap or use a small amount of oil. On the top side of the grommet there is a hole that goes part of the way through, use a small rod (like a phillips screwdriver but not sharp on the end!) and insert it into the hole. Place the grommet over the hole on the pump mount and push the rod down, this will stretch out the rubber and it will pop into place, you can use the same process to mount the pump into the car when you have all of the mounting feet installed. You want a rod slightly smaller than the hole so the rubber can stretch, don't use anything sharp and don't push too hard as you can rip the rubber
If you have any questions
feel free to contact us by clicking on the 'Ask A Question' link in this listing
and we will do our best to help you out. We have convertible top bleeding instructions, scissor top troubleshooting information and much more we can send by mail, email or fax.
Convertible Top Specialists
has been in business for over 29 years selling the best in convertible related parts and weatherstripping for most cars trucks and vans.